CBCBP - CLEAR ITHANE PLUS, 2397

  • MSDS: CBCBP
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: CLEAR ITHANE PLUS, 2397
  • National Stock Number: 8010-00N038436
Product Identification

Product ID:CLEAR ITHANE PLUS, 2397
MSDS Date:05/04/1993
FSC:8010
NIIN:00N038436
MSDS Number: CBCBP

Responsible Party
INTERNATIONAL PAINT CO INC
2270 MORRIS AVE
UNION, NJ 07083-0386
US

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

2.1 @ 20C

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM


10 @ 20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)


ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER; (2-PROPANOL,

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 40-45%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:IRRITATION, REDNESS, TEARING
AND BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN DERMATITIS.
HARMFUL IF ABSORBED THROUGH SKIN. INHALATION:IRRITATION OF
RESPIRATORY TRACT, HEADACHE AND DIZZINE SS AND UNCONSCIOUSNESS.
INGESTION:GASTRO-INTESTINAL IRRITATION, NAUSEA, VOMITING, DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES:FLUSH IMMED WITH COPIOUS QTYS OF WATER FOR @ LEAST 15
MINS. GET MED ATTN IMMED. SKIN:REMOVE CONTAMD CLTHG, WASH SKIN
W/PLENTY OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE.
INHAL:REMOVE TO FRESH AIR. GIVE ARTF RESP IF NEEDED. GET MED ATTN.
INGEST:CALL A PHYS IMMED TO DETERMINE WHETHER OR NOT TO INDUCE
VOMITING.

Fire Fighting

Flash Point:105F,41C
Lower Limits:1.5%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT MUST NOT BE (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STOR OF LIQS W/NFPA CLASS GIVEN BY OSHA. AVOID BRTHG DUST/CHIPS
FROM SANDING/BLASTING SURF COATED W/PROD.
Other Precautions:CHRONIC OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS HAS
BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM DAMGE.

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 TO REMOVE (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP TLV & LEL
OF HAZ INGREDS BELOW LIMS SPECIFIED & TO REMOVE (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:USED AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO EXTREME
HEAT. RESP PROT:COMBINATION OF PARTICULATES & VAPS. VENT:DECOMP PRO
DS DURING WELDING/FLAME CUTTING ON SURFACES COATED WITH PRODUCT.

Chemical Properties

Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.04
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:56(WT)

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.